DESIGN GUIDE: REVIEW & SUBMIT

Step 6: Design Form

Printer-friendly Version Design Guide Login

Fixture(s) Selected from Step 1 - Chart A:

Fixture Photo Fixture Code Fixture Description Typical Fixture Uses Total Number of Fixtures SLR Street Light - Bowl Refractor Streets, roadways, all applications for large areas SLC Street Light - Cut-off Optics Smaller area, brighter direct illumination, no side lighting, Dark Sky PF Power Flood - Knuckle Slip Fitter Boat ramps, corner and perimeter, long linear areas, directional

Fixture Lamp Code(s) Selected from Step 2 - Chart B:

Lamp Code Watts Lamp Type Life (Hours) Lamp Power Consumption Total Number of Lamps 5 5 Watt Compact Fluorescent 12,000 .53 Amps 7 7 Watt Compact Fluorescent 12,000 .75 Amps 9 9 Watt Compact Fluorescent 12,000 .9 Amps

Load Controller(s) Selected from Step 3 - Chart C:

Load Code Load Controller Description Location Total Number of Load Controllers Illumination Schedule (Run-time) DAT(X) Dusk activated timer starts at dusk, specify how many hours Battery Box DAT(X) Dusk activated timer starts at dusk, specify how many hours Battery Box DAT(X) Dusk activated timer starts at dusk, specify how many hours Battery Box

Accessories Selected from Step 4 - Chart D:

Accessory Code Description Quantity TB Upsweep Tenon Bracket 4’ w/2’ Rise SP Side of Pole Bracket 4’ w/2’ Rise TR Truss Bracket – 8’ w/3’ Rise

Solar Electric Power Company uses a four section part number chart to specify your solar lighting system from over a thousand models of various lighting systems. The chart is used to create your part number as well as order your system.

The order for designing a system is:

• Determine the power assembly by completing the design form above and place the code in the part number chart.
• Enter the fixture code for the system from Step 1, Chart A under fixture code in the part number chart below.
• Enter the quantity of fixtures under the number of fixtures (if more than 1) in the part number chart below.
• Enter the lamp code from Step 2, Chart B under the lamp code in the part number chart below.
• Enter the load controller code from Step 3, Chart C under the load controller in the part number chart below.
• Determine the accessory, if required, used for various brackets, select the letter code from Step 4

USER INFORMATION   Name: (required) Subject: (required) Email Address: (required) Zip Code: Please feel free to enter any comments or questions you may have : Thank you for your comments. Login Information Enter a User Name(required): Enter a Password (required): By entering a username and password, this will allow you to save the information you submit in the Design Guide and reference it when you return to our site. Your username will be your email address that you used above. Once you login, you can begin filling out the Design Guide. Additionally you may save and/or print the Design Form page and use to design any future SEPCO™ Solar Electric Lighting Systems. You can stop at anytime during this process and save your place until a later date. This completes your system design and part number. Please click on the SUBMIT DESIGN GUIDE button to send this form to SEPCO™ to receive a quote for your system, or contact your local representative or distributor. Additionally you may save and/or print the Design Form page and use to design any future SEPCO™ Solar Electric Lighting Systems.

DESIGN GUIDE: REVIEW & SUBMIT